Echelon i.LON 10 Betriebsanweisung PDF herunterladen (Seite 9)

the DHCP server, the DNS server specified

by DHCP will be used.

Configuring the i.LON 10 Ethernet Adapter to Communicate With An

LNS Server

Once your i.LON 10 Ethernet Adapter is established as part of a TCP/IP

network, you can configure it to be able to communicate uplink with one or more

LNS Servers. Set the following fields in the Setup web page to allow the i.LON

10 to call uplink to an LNS Server:

LNS Server 1/2/3 Up to three LNS Server names or IP

addresses in the form <LNS Server IP

Address>:<port> or <LNS Server

Name>:<port> (for example, you can specify

123.2.34.1:1628 or

mylns.echelon.com:1628). The i.LON 10

Ethernet Adapter will attempt to send packets

to the first server on the list. If that server

does not respond, it will try the second server,

then the third. LNS Servers can be specified

by DNS name. If DNS names are used, a

DNS server must be listed in

Primary/Secondary DNS Server or be

available through the local network’s DHCP

server.

Listen for incoming LNS

Server connections on port

The TCP port on which the i.LON 10

Ethernet Adapter receives packets

ONWORKS messages). Defaults to 1628. It

is not recommended that the port number be

set below 1025, as ports 0 through 1024 are

normally reserved.

Use CENELEC Access

Protocol

This option is only available on the power-

line model. Set this option to use the

CENELEC protocol for power-line

communications. This protocol is often used

in European power-line installations.

Raw MD5 Authentication

Key/Text Shared Secret

These options appear only when you first

access the i.LON 10 Ethernet Adapter via

HTTP after a security access reset (see

Security Access Reset). You can enter either

a 16 byte, hexadecimal, colon separated key

in Raw MD5 Authentication (i.e.

11:22:33:44:55:66:77:88:99:

00:AA:BB:CC:DD:EE:FF) or a word or

phrase between 16 and 63 characters long

(all white space will be removed) in Text

Shared Secret.

If you select Text Shared Secret, the Raw

MD5 Authentication Key will be cleared.

If you select Raw MD5 Authentication

i.LON 10 Ethernet Adapter Quick Start Guide 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Echelon i.LON 10 Betriebsanweisung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Echelon i.LON 10